
Chase Cover Replacement in Scottsdale
Rusted chase covers are the most common leak we see. We fit sloped stainless steel with a new storm collar and cap.
If the metal top of your stucco chimney is rusty, sagging or holding water, replace it rather than patch it. A standard stainless chase cover typically runs $400 to $900 in Scottsdale, and large, multi-flue or custom covers $900 to $1,500, with the new storm collar and cap included. Your exact price is written down after a free inspection.
Many Scottsdale homes built from the 1970s through the 2000s have factory-built fireplaces inside a framed chimney, called a chase. The chase is capped with a sheet-metal cover. Builders often used flat galvanized covers that hold water, rust, and then leak into the chase and down to the firebox.
We replace them with a custom-measured stainless steel cover with sloped sides and a drip edge, so water runs off instead of sitting on top. A new storm collar and cap go on with it.
Signs you need this
- Rust stains on the stucco below the chimney top
- Water or rust inside the firebox
- Cover sagging in the middle or pooling water
- Rust holes you can see from the ground
- Leak that only shows up in heavy rain
How we do it
- Measure the chaseEach cover is measured for your chimney, not bought off a shelf.
- Install stainlessSloped top, drip edge, new storm collar and cap.
- Check for damageWe look for water damage inside the chase and tell you if framing needs attention.
FAQ
Chase Cover Replacement questions
How do I know if I have a chase cover?
If your chimney is covered in stucco or siding instead of brick, it is almost certainly a framed chase with a metal cover on top.
Can a rusted chase cover be painted or patched?
Patching buys a little time, but rusted covers keep failing. Replacement is the lasting fix.
Why do some covers cost more?
Larger chases, multiple flues and custom shapes need more metal and fabrication.
How much does chase cover replacement cost in Scottsdale?
A standard-size stainless cover is typically $400 to $900. Large, multi-flue or custom-shaped covers run $900 to $1,500. The new storm collar and cap are included, and the exact price is written down after the free inspection.
Will the rust stains on my stucco go away with a new cover?
A new stainless cover stops new streaks from forming. Stains already on the stucco stay until the stucco is cleaned or repainted, which is separate from the cover.
Can a rusted chase cover wait until after monsoon season?
It is better to replace it before. Monsoon storms from July to September drive water sideways into rust holes, and water that gets into the chase can reach the framing and the firebox.
Related
Leaks and the top of the chimney
Book online
Pick a day. We bring the answers.
Free inspection in a 3-hour window: 8 to 11, 11 to 2, or 2 to 5. We call to confirm before we arrive.
